Precautions When Using Brake Pads

Cars have gradually become a daily tool for people to travel, and driving safety has become a matter of concern to people. In addition to people's observance of traffic regulations, the safe driving of vehicles is also an important reason for people to travel safely with the driving accessories of our own vehicles. We Leopard introduces you some knowledge about brake pads.

Among them, the heat insulation layer of the brake pad is made of materials that do not transfer heat for the purpose of heat preservation. The friction block is composed of friction material and adhesive, and it is squeezed on the brake disc or drum to generate friction during braking, so as to achieve the purpose of decelerating and braking the vehicle. Due to friction, the friction block will gradually wear out. Generally speaking, brake pads with lower cost wear faster. After the friction material is used, the brake pads should be replaced in time, otherwise the steel plate will directly contact the brake disc, and later lose the braking effect and damage the brake disc.

Background screenshot.png

Brake pads are also called brake pads. The brake pads determine the braking system of a car. What is the reason for the abnormal noise of the brake pads during driving? What is the solution for brake pad noise?

The reason for the abnormal noise of the brake pads.

1. Excessive wear of brake pads: The service life of brake pads is limited, and they are generally replaced by 60,000 kilometers. Although some vehicles have a long replacement cycle, when the brake pads reach the warning line or are excessively worn, they often make some abnormal noises, which are mainly manifested as sharp metal friction sounds, and the braking effect is poor.

2. The material of the brake pads is good: since the original brake pads are generally made of semi-metallic materials, friction with the brake pads is prone to noise.

3. There are foreign objects between the brake pads: For the car owner, foreign objects such as sand and gravel are brought into the brake pads or brake discs during driving, and abnormal noises will be generated when the car is braking.

4. Irregular installation of the brake system: mainly related to the distance between the brake pad and the brake disc and the tightness of the nut.

Sound solutions when using brake pads:

1. Excessive wear: For excessive wear of the brake pads, the owner should go to the repair shop to replace the brake pads as soon as possible. Abnormal noise is not a big problem, and the braking effect is greatly affected.

2. The material quality is good: this kind of situation usually occurs on ordinary cars, so once such a problem occurs, the owner can replace the brake pads and replace the brake pads with NAO formula. Metal brake pads or ceramic brake pads generally do not produce abnormal noise, but do not replace brake pads that are too soft.

3. Foreign matter: In this case, the owner can go to the repair shop to clean the brake disc. Some foreign matter is mainly attached to the brake disc, so it is easy to affect the use of the brake pads when braking.

4. Irregular installation: This situation is generally troublesome. It is recommended that inexperienced car owners do not repair it by themselves. If possible, we can install it in the vehicle-related store.

The above are the matters that should be paid attention to when using brake pads in Leopard.